ClearView Impact SystemsCLEARVIEWIMPACT SYSTEMS
Hurricane-rated · Licensed CGC1530499

Impact Windows in Coconut Creek, FL

Licensed and insured, installed by our own crews. Financing options available.

  • Our own crews — no subcontractors
  • Free written quote within 24 hours

Prefer to talk?(561) 464-6272

Hurricane season pricing: up to 40% off impact windows & doors. Offer ends August 31.

Coconut Creek impact windows — key facts

Key facts about impact window and door installation in Coconut Creek, Broward County
Service areaCoconut Creek, Broward County and surrounding
LicenceFlorida Certified General Contractor CGC1530499
Product approvalMiami-Dade NOA (HVHZ)
Wind zoneHigh Velocity Hurricane Zone
Permits pulled byUs — City of Coconut Creek
InspectionsIn-progress (anchoring) then final, both scheduled by us
ManufacturersECO Window Systems and Mr. Glass, authorised installer
Manufacturer lead time4–7 weeks from order; some stock held
Installed byOur own W-2 crews — no subcontractors
Experience11+ years, 9,000+ windows and doors installed
QuoteFree in-home measurement, fixed written price per opening

Written and maintained by ClearView Impact Systems, Florida Certified General Contractor #CGC1530499, installing impact windows and doors across Broward County since 2015. Impact windows and doors only, which is the whole business.

Permits and inspections for impact windows in Coconut Creek

Permits for Coconut Creek are issued by the City of Coconut Creek building department, in Broward County, and the job is inspected to Miami-Dade Notice of Acceptance (NOA) approved products, because the whole county sits inside the High Velocity Hurricane Zone.

We pull the permit with City of Coconut Creek ourselves rather than handing you a packet to file. We book the in-progress anchoring inspection and the final, and we meet the inspector at each one, so the permit closes out instead of sitting open against your address.

Coconut Creek sits inside the High Velocity Hurricane Zone, so every unit we install here carries a Miami-Dade Notice of Acceptance and is tested to large-missile impact and cyclic wind pressure. That is a stricter standard than the rest of Florida, and a product approved elsewhere in the state does not automatically qualify.

We install across Coconut Creek 33063 — including Winston Park, Wynmoor, Regency Lakes, The Township — and the surrounding Broward County area, with our own crews and licence CGC1530499 on every permit.

Serving Coconut Creek, Broward County

Local Impact Windows Installation in Coconut Creek, FL

Coconut Creek's master-planned communities and 55+ neighborhoods are excellent candidates for whole-house impact packages with consistent finishes and meaningful insurance premium reductions.

Coconut Creek's Wynmoor Village, Township, and Banyan Trails communities include both 55+ and family neighborhoods with consistent window sizes across streets — ideal conditions for whole-house impact upgrades with matched product specs. Our Coconut Creek impact window company writes fixed-price window replacement Coconut Creek FL quotes with insurance-credit projections. Hurricane window installation Coconut Creek permits pull through the City of Coconut Creek building department with HVHZ Miami-Dade NOA-approved impact products, and impact doors Coconut Creek upgrades finish alongside windows.

ClearView Impact Systems is a Florida-licensed general contractor (License #CGC1530499) with in-house installation crews serving Coconut Creek and the surrounding Broward County area. Every impact windows project includes a free in-home measurement, fixed written pricing, permit pulling with the local building department, and manufacturer warranties on glazing and hardware.

Neighborhoods we install in across Coconut Creek

Winston ParkWynmoorRegency LakesThe Township

Coconut Creek permits pulled

We pull permits directly with the Broward building department for every install.

FL Product Approval

Every product installed in Coconut Creek carries Florida Product Approval and HVHZ-rated impact certification where required.

In-house installers

No subcontractors. Our W-2 Coconut Creek-area installation teams handle measurement through cleanup.

Impact Windows · Coconut Creek

What impact window replacement in Coconut Creek actually involves

Impact windows are engineered as a system: laminated glazing, a reinforced frame, and anchors sized to the wind pressure at your specific address. The glass is the part homeowners ask about, but the anchoring and the frame are what pass inspection.

Every opening in Coconut Creek sits inside the High Velocity Hurricane Zone, so products carry Miami-Dade Notice of Acceptance approval and are tested to large-missile impact and cyclic wind pressure. Design pressure is calculated per elevation from your address and roof height, so the same product is not automatically approved on every side of the house. On windows, the issue that most often changes a Coconut Creek quote is bedroom egress: clear opening, not rough opening, has to meet Florida Building Code minimums, and original units on older homes frequently fall short once the frame and meeting rail are subtracted — so the replacement gets sized up rather than matched. We install regularly in Winston Park, Wynmoor, Regency Lakes and across Coconut Creek (33063). Most work here is retrofit into existing masonry openings, which means anchoring to the calculated pressure and then sealing and patching the perimeter. Permits pull through the City of Coconut Creek or Broward County building department.

Egress requirements on bedrooms

Every bedroom needs at least one opening that meets Florida Building Code egress minimums — 5.7 sq ft of clear opening, at least 24 inches high and 20 inches wide, with a sill no more than 44 inches off the floor. This is where single-hung and horizontal-roller replacements catch people out: the operating sash is only part of the frame, so a window that looks large enough often is not once the frame and meeting rail are subtracted. We measure clear opening, not rough opening, on every bedroom before quoting.

Glazing choices and what each one changes

Clear laminated is the default and the least expensive. Grey and bronze tint cut solar heat on west and south exposures. Low-E coatings reduce heat transfer and UV fading on flooring and furniture, and are usually the better value on large west-facing spans. Laminated glass also cuts airborne noise noticeably — typically the benefit homeowners mention first, well before the next storm season.

Operating style drives cost more than size

Fixed picture units are the cheapest per square foot because there is no operating hardware and no air-infiltration path. Single-hung is the standard replacement for most South Florida homes. Casement costs more but seals tighter under pressure and is often specified on the windward elevation. Horizontal rollers suit wide, short openings where a hung window would leave an awkward proportion.

Stucco, tie-ins and what the install actually disturbs

Most replacements here are retrofit into existing masonry openings. That means cutting the old frame out, installing and anchoring the new unit, then sealing and patching the perimeter. Expect stucco patching on the exterior and minor drywall touch-up at the interior return. We put that in the written estimate up front rather than raising it mid-job.

Window styles we install in Coconut Creek

Single hungDouble hungCasementHorizontal rollerFixed pictureBayArchitectural shapes
Map of the ClearView Impact Systems service area with Coconut Creek markedCoconut Creek is in Broward County. The map plots every city we serve across Palm Beach, Broward, Miami-Dade, Martin and St. Lucie counties, with Coconut Creek highlighted and our Hialeah office marked.
Coconut Creek other cities we serve our office

Where Coconut Creek sits in our service area

Coconut Creek is in Broward County. We work out of Hialeah and cover Palm Beach, Broward, Miami-Dade, Martin and St. Lucie counties with our own crews rather than subcontractors, so the same people measure, install and come back if anything needs attention. Licence #CGC1530499.

County
Broward County
Wind zone
High-Velocity Hurricane Zone
Areas we cover
Winston Park, Wynmoor, Regency Lakes, The Township

Permitting & local requirements

Installing impact windows and doors in Coconut Creek

Coconut Creek is inland north-west Broward, built largely from the 1970s onwards and heavily weighted towards master-planned and 55+ communities. Community approval shapes the schedule here more than the engineering does.

Inland exposure inside the HVHZ

Both Miami-Dade and Broward sit inside the High Velocity Hurricane Zone, the strictest wind-borne debris regime in the United States. Products have to hold a Miami-Dade Notice of Acceptance, which means passing large-missile impact testing — a nine-pound 2x4 fired at the glass — followed by thousands of cycles of positive and negative pressure to prove the assembly still holds after it has been hit. Coconut Creek's distance from open water puts it among the lower design-pressure calculations in Broward, which widens the qualifying range and occasionally shows up in the price. The approval requirement itself does not move — every unit still carries a Miami-Dade NOA, and the inspection checks the number against the size installed.

Permitting through the City of Coconut Creek

Coconut Creek runs its own building department under the county-wide technical rules set by Broward's Board of Rules and Appeals. We file the permit and prepare the submittal: NOA documentation, a window and door schedule keyed to your elevations, and a signed and sealed engineering evaluation of design pressures opening by opening.

Wynmoor, Winston Park and the 55+ question

A large share of Coconut Creek's housing sits in master-planned or age-restricted communities, and Wynmoor in particular is close to a small town in its own right. In those communities the exterior is frequently governed rather than owned outright: approved product lists, a specified frame colour, and in some cases rules about how work may be scheduled and where material may be staged. The written approval normally has to exist before the permit application is worth filing, and boards meet on their own calendar. We request the form at the measure and run it in parallel with the permit rather than in sequence.

Windows inside a Coconut Creek community

With low inland pressures most of the NOA range qualifies, so the community's approved list is usually the binding constraint rather than the engineering. Single-hung carries most whole-home jobs at the lowest cost per opening. Horizontal rollers suit the wide, short openings common in this stock. Frame colour is settled against the approval before the order goes in — a colour the board has not approved is a reorder rather than a site fix.

Work completed in Coconut Creek

Recent Coconut Creek installations

Our own crews, our own photographs, in Coconut Creek. Ask to see the full set at your estimate — including the stucco tie-ins, which is the part nobody puts in a brochure.

Rear opening in a Coconut Creek home stripped back to the block after the original sliding glass door was removed, looking out across the lake
Before
The same opening after installation, fitted with a dark bronze three-panel Eco-Guard impact sliding glass door looking out across the lake
After

The Township, Coconut Creek

June 2026 · 7 openings

A lakeside townhouse in The Township, done as a whole-home package: the rear sliding glass door, the front entry and five windows, seven openings in all. The before and after photographs are the same viewpoint in the living room a few hours apart — the rear opening stripped back to the block in one, the finished three-panel slider in the other.

Products installed

  • Eco Window Systems Eco-Guard three-panel impact sliding glass door, dark bronze with grey tint glass
  • Full-glass impact front entry door
  • Five impact windows

What the job involved

  • Whole-home package — every opening in the envelope, which is what the wind mitigation credit is assessed on
  • Permitted through the City of Coconut Creek building department
  • Broward County address, so every unit carries a Miami-Dade Notice of Acceptance
  • Original rear opening stripped back and the threshold rebuilt before the new door was set

Want to see a job like this near you in Coconut Creek?

How it works

Our simple installation process

From first evaluation to final walkthrough, handled by in-house crews — never subbed out.

Free Home Evaluation

We visit your home to assess your windows and doors, take measurements, and discuss your needs — all at no cost.

Custom Product Recommendations

Based on your home's requirements, we recommend the best impact products from trusted manufacturers to fit your budget.

Professional Installation

Our licensed in-house crew handles every detail with care, ensuring a clean and efficient installation process.

Final Walkthrough & Warranty Review

We walk you through every completed installation, review your warranty coverage, and make sure everything meets your expectations.

What our customers are saying

Verified homeowner reviews from across South Florida. Ask us for Coconut Creek references at your estimate.

HL

Hannah L.

Jun 2025

I had a fantastic experience with ClearView impact. Everything was smooth, professional and on time. The team was knowledgeable and helped me choose the right impact windows for my home. The installation crew was respectful, clean and did a flawless job. My house looks fantastic and feels much safer now. And the noise reduction is the best part.

LS

Loren S.

May 2025

We had impact windows installed throughout our entire home and the difference is night and day. Not only do they look so pretty and modern, but we also feel much safer going into hurricane season. The crew was knowledgeable, respectful, and kept us updated every step of the way.

UT

Uliana T.

May 2025

ClearView exceeded all my expectations! The team was incredibly professional and walked me through every option. The impact windows they installed are beautiful and I already notice a huge difference in noise reduction and energy savings. Couldn't be happier with the results!

SG

Sheila G.

May 2025

From the initial consultation to the final installation, ClearView was top-notch. They handled all the permits and made the whole process stress-free. Our new impact windows look amazing and we feel so much more secure. Excellent craftsmanship and wonderful customer service!

RS

Robert S.

Apr 2025

Highly recommend ClearView Impact! They gave us a fair price and delivered outstanding work. The installation crew was punctual, professional, and left everything spotless. Our home feels safer and more energy efficient. Best home improvement decision we've made!

BM

Benjamin M.

Feb 2025

ClearView installed my impact windows flawlessly! Great quality, professional team, and a smooth process from start to finish. My home looks much better now. Highly recommend!

FAQ — Coconut Creek

Common questions from Coconut Creek homeowners

Coconut Creek is in Broward County, which lies entirely inside Florida's High-Velocity Hurricane Zone — so every window and door installed here must carry a Miami-Dade Notice of Acceptance, not just statewide Florida Product Approval. The NOA is the strictest impact approval in the country: assemblies are hit with a nine-pound length of lumber and then cycled through thousands of pressure reversals. Practically, it means a narrower list of qualifying products and an inspector who will check the approval number against the exact size installed.
Call